Home / Technologies / Acid gases / Acid scrubber
AbsorbsAcid gases
The volatile compounds transfer from the gas to an acid liquid, where they are neutralized or hydrolyzed and remain as salts or non-volatile compounds. It is a proven method for volatile nitrogen compounds and epoxides.

Efficiency on NH₃ and amines
> 99 %
Ethylene oxide
Up to 99.9999% (multiple stages)
Usual reagent
H₂SO₄
Control
pH and conductivity
Operating principle
The gas passes through the column and the alkaline compounds transfer to the acid solution.
In the liquid they are neutralized or hydrolyzed and remain as salts or non-volatile compounds.
In automatic mode, acid is dosed based on the pH reading.
The solution is renewed based on conductivity so that salts do not precipitate.
Specifications
| Pollutants | NH₃; methylamine, dimethylamine and trimethylamine; ethylamine; hexamethylenediamine |
| Epoxides | Ethylene oxide, propylene oxide, butylene oxide |
| Reagent | Sulfuric acid, the most common thanks to its low cost and low vapor pressure |
| Other acids | Hydrochloric, nitric, formic |
| Batch operation | No automatic dosing; for example, 10% H₂SO₄ solution |
| Automatic operation | Acid dosing based on pH and solution renewal based on conductivity |
| Efficiency | > 99% for NH₃, trimethylamine and similar compounds under optimal conditions |
| Ethylene oxide | Up to 99.9999% or more in multi-stage scrubbers |
| Esters | Over 80% |
| Flow rate | 1,000–60,000 m³/h per tower |
| Installed power | 2.5–95 kW depending on the flow rate (packed tower range) |
Industries
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com