Home / Technologies / Acid gases / Chemical scrubber

AbsorbsAcid gases

Chemical scrubber

Transfers pollutants from the air to a liquid by absorption, either through reaction with a chemical reagent or by physical absorption. It removes acid or alkaline gases, odors and mists in one, two or three stages.

Other technologies
Chemical scrubber – plant diagram

Flow rate

1,000–60,000 m³/h

Efficiency

Up to 98%

Scrubbing stages

1, 2 or 3

Chemicals

Acid, alkaline or oxidizing

Operating principle

How it works

  1. 01

    Inlet

    The contaminated gas enters at the bottom of the tower.

  2. 02

    Scrubbing

    A centrifugal pump and spray nozzles continuously spray the scrubbing solution over the gas.

  3. 03

    Make-up

    Automatic systems top up the reagent and water and maintain the level.

  4. 04

    Outlet

    The clean gas leaves at the top.

Specifications

Technical data

Column typesPacked (Raschig or Pall rings, Berl saddles), tray, spray or jet
Vertical versionCountercurrent flow; smaller footprint, more height
Horizontal versionCrossflow through the packing; less height, better load distribution and longer contact time
Compact versionSmaller-diameter tower for tight spaces
PackingRandom or structured; towers in series or stacked
Multi-stage systemsThey combine different scrubbers and solutions depending on the pollutants and concentrations
Acid scrubbingSulfuric or hydrochloric acid, for ammonia and alkaline compounds
Alkaline scrubbingSodium hydroxide, for HCl, H₂SO₄, HNO₃, HF, HBr
Oxidizing scrubbingHypochlorite or peroxides, for odors and disinfection
Reducing scrubbingSodium bisulfite, for chlorine, bromine and other halogens
Solvent scrubbingSoluble amines or oils, for halogenated compounds, aldehydes and hydrocarbons
Water scrubbingNo reagents, for highly soluble gases; once-through or with a double loop
Automatic controlpH (dosing), redox potential (oxidizing and reducing scrubbers) and conductivity (solution renewal)
MaterialsPP or PVDF up to 80–90 °C; carbon steel, AISI 304 or 316 at high temperature or pressure
Reference hydraulic designGas velocity of around 2.3 m/s, contact time > 1 s, pressure drop < 200 mm WC, PP rings above 160 m²/m³
PollutantsChromic acid, H₂S, NH₃, chlorides, fluorides, SO₂, NOx, VOCs, odors, particles
Standard equipmentBottom sump, 3-point level control, automatic reagent and water make-up, manhole, control panel
EfficiencyUp to 98% in a packed tower; up to 99% in some cases, depending on gas composition and design
Air flow rate1,000–60,000 m³/h per tower
OptionsConstruction in AISI 304, AISI 316, FRP, PVDF or PE; fan with variable frequency drive; acoustic enclosure; frost protection

Indicative sizing (packed tower)

Flow rate (m³/h)Dimensions (m)Installed power (kW)
10001.0 × 1.0 × 3.02,5
50001.4 × 1.2 × 4.210
10 0001.8 × 1.6 × 5.018
20 0002.2 × 2.2 × 5.636
30 0002.8 × 2.4 × 6.145
40 0003.2 × 2.8 × 6.665
50 0003.4 × 3.0 × 6.888
60 0003.8 × 3.6 × 7.095

Advantages

  • Handles large variations in load and gas composition
  • Common reagents (water or an alkaline, acid or oxidizing solution)
  • Automatic operation
  • Low pressure drop

Field of application

  • Pollutants soluble in the scrubbing solution
  • Acid gases, ammonia, odors and mists

Limitations

  • Plastic construction is limited to 80–90 °C
  • Efficiency depends on the reagent and the pollutant's solubility
  • Needs well-designed capture and ductwork

Industries

Where it is used

Wastewater treatment plantsCompostingSlaughterhouses and animal fatsFish processingChemicals and pharmaceuticalsIncineratorsFoundriesSolid waste treatmentAnimal feedEnergy

Datasheet

Full datasheet: Chemical scrubber

Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.

All technologies

Datasheet

Request the full datasheet

Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.

  • Full technical data for the technology you choose
  • An assessment of whether it suits your gas or your effluent

Would you rather write to us directly?

info@wizzum.com

The first conversation is free and with no obligation.