Home / Technologies / VOCs and solvents / Direct oxidation

DestroysVOCs and solvents

Direct thermal oxidation

Destroys VOCs and other harmful gases through controlled combustion with excess oxygen at high temperature; the result is CO₂ and water vapor. It treats the emission directly, with no prior concentration or adsorption. It is the simplest kind of thermal incinerator.

Other technologies
Direct thermal oxidation – plant diagram

Temperature

750–950 °C

Removal efficiency

> 99 %

Concentration

High

Flow rate

Constant and stable

Operating principle

How it works

  1. 01

    Combustion

    High-efficiency burners (natural gas, biogas or hydrogen) heat the insulated combustion chamber.

  2. 02

    Controlled oxidation

    Automatic control of temperature, residence time and turbulence, with excess oxygen.

  3. 03

    Heat recovery

    Direct or recuperative heat exchangers preheat the incoming stream.

  4. 04

    Outlet

    The cleaned gases, CO₂ and water vapor, are released to the atmosphere.

Specifications

Technical data

Operating principleControlled combustion with excess oxygen
Chamber temperature750–950 °C
Removal efficiency> 99% for VOCs and hazardous gases
FuelsNatural gas, biogas, hydrogen
ControlAutomatic control of temperature, residence time and turbulence
Heat recoveryDirect or recuperative heat exchangers
ProductsCO₂ and water vapor
Air flow rate500–50,000 Nm³/h
Residence time0.5–2 s

Advantages

  • High reliability and destruction efficiency in difficult conditions
  • Low maintenance and high availability
  • Materials resistant to high temperature and corrosion
  • Lower fuel use thanks to heat recovery
  • Can be connected to an emissions monitoring system

Field of application

  • Processes with a constant, stable flow rate
  • Emissions with a high pollutant concentration
  • Direct treatment, with no concentration or adsorption

Limitations

  • Without heat recovery, the energy cost is very high
  • Needs support fuel unless the VOC concentration is very high

Industries

Where it is used

ChemicalsPharmaceuticalsPetrochemicalsWaste treatmentIndustrial coatings

Datasheet

Full datasheet: Direct oxidation

Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.

All technologies

Datasheet

Request the full datasheet

Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.

  • Full technical data for the technology you choose
  • An assessment of whether it suits your gas or your effluent

Would you rather write to us directly?

info@wizzum.com

The first conversation is free and with no obligation.