Home / Technologies / Acid gases / Reducing scrubber
ReducesAcid gases
The volatile compounds are absorbed in water and then chemically reduced. It is used for halogens such as chlorine and bromine.

Pollutants
Cl₂, Br₂ and other halogenated compounds
Usual reagent
Sodium bisulfite
Control
Redox, pH and conductivity
Flow rate
1,000–60,000 m³/h
Operating principle
The halogens transfer from the gas to the scrubbing water.
The bisulfite chemically reduces them in the liquid.
Automatic based on redox and pH; batch, if the pollutant input is well known.
The solution is renewed based on conductivity.
Specifications
| Pollutants | Bromine (Br₂), chlorine (Cl₂) and other halogenated compounds |
| Reagent | Sodium bisulfite (NaHSO₃), the most common reducing agent |
| Batch operation | Possible when the input of volatile compounds is well known |
| Automatic operation | Dosing based on redox potential and pH; this is the most common mode |
| Role of pH | Improves kinetics, reduces reagent consumption, prevents scaling and limits unwanted emissions |
| Solution renewal | Based on conductivity |
| Efficiency | Up to 98% in a packed tower |
| Flow rate | 1,000–60,000 m³/h per tower |
| Installed power | 2.5–95 kW depending on the flow rate (packed tower range) |
Industries
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com