Home / Technologies / Particulates / Venturi scrubber

ScrubsParticulates

Venturi scrubber

A wet scrubber with a converging section, a throat and a diverging section. In the throat the gas reaches its highest velocity and the liquid breaks into fine droplets that capture particles and soluble gases; these are then separated in the packing and the mist eliminator.

Other technologies
Venturi scrubber – plant diagram

Flow rate

1,000–60,000 m³/h

Particle size

< 1 µm and larger

Efficiency

Up to 98%

Power

2.5–95 kW

Operating principle

How it works

  1. 01

    Converging section

    The gas enters and starts to accelerate.

  2. 02

    Throat

    The gas reaches its highest velocity; the injected liquid breaks into fine droplets that capture the particles and pollutants.

  3. 03

    Diverging section and packing

    The velocity drops, contact time increases and the gas passes through a packed column.

  4. 04

    Mist eliminator

    Removes entrained droplets; a continuous bleed with water make-up reduces cleaning.

Specifications

Technical data

Operating principleGas velocity combined with a scrubbing solution (water or reagent)
Flow rate1,000–60,000 m³/h
ParticulatesBelow 1 µm and larger
EfficiencyUp to 98%; up to 99% in some cases, depending on composition and design
GasesHot, humid, highly concentrated or containing hazardous substances; also good efficiency with soluble VOCs
ThroatAdjustable on some models, for variable flow
Liquid and gas flowCocurrent and at high velocity in the throat; low-velocity scrubbing in the packed tower
MaterialPolypropylene as standard; AISI 304, AISI 316, FRP, PVDF or PE as options
Standard equipmentBottom sump, drain and automatic bleed valve, automatic water and reagent make-up, 3-point level control, manhole, control panel
OptionsFan, variable frequency drive, acoustic enclosure, frost protection
PumpStainless steel or PP, vertical or horizontal shaft
CleaningClean-in-place (CIP) through internal nozzles
Pressure dropVenturi throat < 600 mm WC; packed tower < 200 mm WC
Efficiency by pollutantParticles 70–99% (water), over 95% for submicron particles · NH₃, amines and ethylene oxide > 99% (acid solution) · esters > 80% · HCl, HF and SO₂ > 99% (alkaline solution) · phenols > 90% · H₂S 90–95%
Design temperatureFrom −20 to 250 °C; the Venturi also cools the gas
Industrial buildPickled and passivated AISI 316L; Venturi with acid-resistant polymer lining; designed to ASME VIII Div. 1, 20-year service life, ATEX zone 2
Scrubbing towerVertical packed tower, 2 scrubbing sections, contact time > 1 s, gas velocity of around 2.3 m/s, PP rings above 160 m²/m³
Recirculation2 centrifugal pumps (1 duty + 1 standby) and a plate heat exchanger to cool the scrubbing water
InstrumentationPressure, temperature and level transmitters, level indicators and pH measurement
Reference for 20,000–60,000 m³/hTower Ø 2.6 m and 9.4 m total height; 120 m³/h, 15 kW pumps; 20 m³ FRP caustic tank; skid-mounted with FAT

Indicative sizing

Flow rate (m³/h)Dimensions (m)Power (kW)
10001.2 × 1.5 × 3.32,5
50001.6 × 2.0 × 3.810
10 0001.8 × 2.5 × 4.118
20 0002.0 × 2.5 × 5.036
30 0002.5 × 2.5 × 5.545
40 0003.0 × 3.0 × 5.865
50 0003.0 × 3.5 × 6.088
60 0003.5 × 3.5 × 6.695

Advantages

  • Compact design
  • Effective with hot or humid gases and with sticky, fine or hygroscopic particles
  • No moving parts apart from the fan and the pump
  • Low maintenance; clean-in-place

Field of application

  • Fine particles and soluble gases
  • Metal, plastic and food dust (starch, flour, husks), dust from waste and from battery and electronics recycling

Limitations

  • Produces a liquid bleed that has to be managed
  • Uses more energy than a packed tower because of the pressure drop in the throat, up to 600 mm WC

Industries

Where it is used

Food and beverageChemicals and pharmaceuticalsMiningAutomotiveMechanical engineeringBattery recyclingEnergyWood industryTextilesCeramicsCosmeticsMetalworking

Datasheet

Full datasheet: Venturi scrubber

Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.

All technologies

Datasheet

Request the full datasheet

Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.

  • Full technical data for the technology you choose
  • An assessment of whether it suits your gas or your effluent

Would you rather write to us directly?

info@wizzum.com

The first conversation is free and with no obligation.