Home / Technologies / Acid gases / Water scrubber
AbsorbsAcid gases
Absorbs moderately or highly soluble gases in water, with no reagent dosing. It works with once-through clean water or with a double loop, which reduces water consumption.

Chemicals
Not needed
Configuration
Once-through or double loop
Compounds
Moderate or high solubility
Efficiency
Very high with an adequate water supply
Operating principle
Clean water enters at the top of the column.
The soluble compounds transfer from the gas to the water in the packing.
Optional: the lower section runs on recirculated water and the upper section on once-through water.
The scrubbing water goes back to the process or to the wastewater treatment plant.
Specifications
| Acids and bases | HCl, HF, H₂SO₄, H₂S, NH₃ |
| Organic compounds | Alcohols (methanol, ethanol), ketones (acetone), aldehydes (butanal), acetates (vinyl acetate) |
| Once-through | Continuous clean water supply from the top; no chemical dosing |
| Double loop | Lower packing with recirculation and upper once-through packing; the recirculation pump also handles the bleed |
| Tank farms | Two or more water inlets: a small one for breathing losses and a larger one for gases displaced during filling |
| Discharge | Reuse in the process or treatment at the wastewater treatment plant |
| Efficiency | Very high with an adequate clean water supply |
| Flow rate | 1,000–60,000 m³/h per tower |
| Installed power | 2.5–95 kW depending on the flow rate (packed tower range) |
Industries
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com