Home / Technologies / VOCs and solvents / Zeolite concentrator
ConcentratesVOCs and solvents
An adsorption and desorption rotor captures the VOCs from a large, dilute stream and transfers them to a much smaller, concentrated one, which then goes to thermal oxidation.

Inlet concentration
< 1 g/Nm³
Concentration factor
Up to 16:1
Desorption temperature
180–220 °C
Flow rate
10,000–200,000 Nm³/h
Operating principle
A filter retains particles that could damage the zeolite.
The gas passes through the rotor and the VOCs stay in the zeolite.
The cleaned gas leaves through the stack.
A small countercurrent stream of hot gas releases the VOCs and forms a concentrated gas.
The concentrated gas goes to the thermal oxidizer.
Specifications
| Operating principle | Adsorption and desorption in a zeolite rotor |
| Rotor | Zeolite adsorbent coated on a corrugated mineral fiber substrate |
| Inlet VOC concentration | < 1 g/Nm³ |
| Volume reduction | Up to 16 times |
| Desorption temperature | 180–220 °C, with hot air; the rotor is then cooled in its own zone |
| Rotor cooling zone | 75–110 °C (the heat is used to preheat the desorption air) |
| Pretreatment | Particle filtration |
| Downstream treatment | Thermal oxidation |
| Air flow rate | 10,000–200,000 Nm³/h; several rotors for the highest flow rates |
| Capture efficiency | 90–98% in the rotor; overall efficiency also depends on the oxidizer |
Industries
Projects
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com