Home / Technologies / Water and discharge / Vacuum crystallization and ZLD / Mechanical recompression (MVR)
Vapor recompression (MVR)Vacuum crystallization and ZLD
An electric evaporator-crystallizer with mechanical vapor recompression and forced circulation. It handles wastewater with a high pollutant load and salt precipitation; a high-speed recirculation pump prevents scaling in the main heat exchanger.

Distillate production
600–2,500 l/h
Energy consumption
64 kWh/m³
Evaporation temperature
Around 90 °C
Vacuum
Around 700 mbar
Operating principle
The product is preheated with the hot distillate.
The recirculation pump drives the product at high speed through the main heat exchanger.
A Roots blower compresses the vapor, which returns as the heat source; a small amount of saturated steam supplies heat for start-up and as support.
The salts precipitate in the conical chamber and the concentrate is discharged.
Specifications
| Technology | Mechanical vapor recompression (MVR), forced circulation, single effect |
| Heat input | A small amount of saturated steam |
| Chamber | Vertical, conical |
| Heat exchanger | Shell and tube |
| Mist eliminator | Mesh demister |
| Vacuum system | Roots blower |
| Standard material | AISI 316 / 316L |
| Corrosion-resistant material | Super duplex 2507 |
| Protection rating · power supply | IP54 · 400 V III + PE 50 Hz |
| Capacity (l/h) | 600 | 800 | 1000 | 1500 | 2000 | 2500 |
|---|---|---|---|---|---|---|
| Support steam (kWth, operation / start-up) | 36 / 54 | 48 / 72 | 60 / 90 | 90 / 136 | 121 / 181 | 151 / 226 |
| Length (cm) | 600 | 600 | 700 | 730 | 770 | 810 |
| Width (cm) | 170 | 238,5 | 220 | 220 | 245 | 245 |
| Height (cm) | 530 | 559 | 650 | 650 | 700 | 752 |
Power consumption for all sizes: 64 kWh/m³. Indicative values for clean water at 20 °C and 1013 mbar in steady-state operation. Actual values depend on the wastewater composition and the required final concentration.
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
OFFICE
Avda. Cabrera, 36
08302 Mataró (Barcelona), Spain
info@wizzum.com
© 2026 Wizzum. All rights reserved.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com