Home / Technologies / Water and discharge / Vacuum crystallization and ZLD / Thermal · forced circulation
Thermal energyVacuum crystallization and ZLD
An evaporator-crystallizer for large volumes, powered by saturated steam or hot water. It handles a high pollutant load and salt precipitation; fast circulation and the inclined heat exchanger prevent scaling and make draining easier.

Capacity
20,000–100,000 l/day
Thermal power
630–3,140 kWth
Evaporation temperature
Around 60 °C
Vacuum
Around 200 mbar
Operating principle
Steam or hot water heats the product in a shell and tube heat exchanger.
The recirculation pump runs at high speed so that no scale forms.
The dissolved salts precipitate in the vertical conical chamber.
The vapor condenses with cooling water; the inclined heat exchanger drains into the chamber during shutdowns.
Specifications
| Technology | Evaporation with thermal energy, forced circulation, single effect |
| Heat source | Saturated steam or hot water |
| Condensation | Cooling water |
| Chamber | Vertical, conical |
| Heat exchanger | Shell and tube, inclined for draining |
| Mist eliminator | Mesh demister |
| Vacuum system | Liquid ring pump |
| Standard material | AISI 316 / 316L |
| Corrosion-resistant material | Super duplex 2507 |
| Protection rating · power supply | IP54 · 400 V III + PE 50 Hz |
| Capacity (l/day) | 20 000 | 40 000 | 60 000 | 80 000 | 100 000 |
|---|---|---|---|---|---|
| Electrical power (kW) | 26 | 32 | 35 | 46 | 48 |
| Thermal power (kWth) | 630 | 1260 | 1885 | 2515 | 3140 |
| Length (cm) | 650 | 700 | 700 | 750 | 810 |
| Width (cm) | 260 | 360 | 400 | 400 | 400 |
| Height (cm) | 510 | 600 | 660 | 660 | 739,5 |
The thermal condensation capacity equals the evaporation capacity. Indicative values for clean water at 20 °C and 1013 mbar in steady-state operation. Actual values depend on the wastewater composition and the required final concentration.
Datasheet
Dimensions, design data and operating ranges. Leave us your details and an engineer will send you the datasheet and tell you whether this technology fits your plant.
OFFICE
Avda. Cabrera, 36
08302 Mataró (Barcelona), Spain
info@wizzum.com
© 2026 Wizzum. All rights reserved.
Datasheet
Choose the technology and leave us your details. An engineer who knows that technology will send you the datasheet.
Would you rather write to us directly?
info@wizzum.com