Home / Blog / Industrial wastewater

INDUSTRIAL WASTEWATER

Less wastewater and a lower pollutant load in the chemical industry

Treating wastewater at chemical plants demands more than it used to: discharge limits are getting stricter and investors are looking at ESG indicators. Strategies are needed that reduce both the amount of wastewater and its pollutant load.

W
WIZZUM engineering teamPublished on 05/12/2023 · 6 min read

CONTENTS

IN SHORT

  • The cheapest wastewater is the wastewater you don't produce: better dosing, CIP cleaning optimization and material changes reduce wastewater at source.
  • Treated water can be reused in cooling towers, as boiler feed and for cleaning equipment.
  • Segregating streams at source, carrying out a water audit and digital monitoring usually deliver quick results with little investment.

Wastewater treatment is the foundation of sustainable chemical production. Well managed, it helps with regulatory compliance, saves resources and keeps the plant efficient over the long term. As discharge limits tighten and ESG expectations grow, plants need integrated strategies that reduce both the volume of wastewater and its pollutant load.

Why wastewater management is so important in chemicals

Chemical production uses complex compounds, hazardous substances and large amounts of process water. Poor wastewater management leads to environmental damage, penalties and reputational harm. Modern water management, on the other hand, can improve resource efficiency and support sustainability goals.

Process optimization: less water at source

Reducing wastewater starts with the process. What helps:

  • upgrading dosing and reaction control;
  • fine-tuning clean-in-place (CIP) procedures;
  • switching to materials that use less water or are more environmentally friendly.

Even small changes can measurably reduce the volume of wastewater and the concentration of pollutants.

Water reuse

Treated water can be reused:

  • in cooling towers;
  • as boiler feed;
  • for cleaning equipment.

This reduces both water abstraction and discharge. In batch production it also helps to even out flows and simplify treatment.

Advanced treatment of difficult pollutants

Chemical industry wastewater can contain organic solvents, surfactants, heavy metals and toxic compounds. Membrane filtration (UF, NF, RO), advanced oxidation processes (AOP) and selective ion exchange are used to remove them. These technologies make it possible to target specific pollutants and sometimes recover valuable by-products.

Segregating streams at source

Separating heavily loaded water from cleaner water makes it possible to:

  • tailor the treatment to each stream;
  • avoid overloading the central treatment plant;
  • improve efficiency and increase the potential for water reuse.

This is especially important at multi-product plants and in batch production, where the wastewater composition varies a lot.

Water audit: hidden opportunities

A full water audit includes:

  • a map of water consumption and wastewater flows;
  • identification of the processes that use the most water and produce the highest pollutant load;
  • the options for reusing water.

Audits often uncover quick improvements with little investment, such as recovering cleaning water or optimizing CIP.

Digital monitoring and smart control

Real-time monitoring with SCADA or AI platforms tracks the flow, composition and quality of the discharge. This makes it possible to:

  • detect anomalies early;
  • automatically correct the operation of the treatment plant;
  • carry out predictive maintenance and trend analysis.

It helps both with regulatory compliance and with the plant’s flexibility.

Safety and lower risk

Effective treatment reduces exposure to volatile organic compounds, corrosive substances and toxic residues. Workplaces are safer and, by removing the residues, there are fewer operations involving hazardous materials.

Less wastewater as an ESG investment

Reducing the amount of wastewater and its pollutant load supports:

  • regulatory compliance;
  • a better company image;
  • access to green certifications and sustainable finance;
  • interest from investors who follow ESG criteria.

A report by the World Economic Forum and Oliver Wyman identifies five priority lines of action for the chemical sector that, by 2030, could open up more than $320 billion a year in business opportunities. We explain the legal requirements behind these changes in the article on EU wastewater regulations.

Conclusion

Chemical manufacturers have to balance innovation, costs and environmental responsibility, and wastewater treatment has become a strategic asset. Well designed, it strengthens regulatory compliance and allows the chemical industry to lead industry’s sustainable transformation.

Frequently asked questions

How can wastewater be reduced at a chemical plant?+

Starting with the process: improving dosing and reaction control, fine-tuning CIP cleaning and switching to materials that use less water. Then, segregating streams at source and reusing treated water.

Where can treated water be reused?+

In cooling towers, as boiler feed and for cleaning equipment.

Where should you start?+

With a water audit: a map of water consumption and wastewater flows, the processes with the highest consumption and load, and the options for recovering water.

W

AUTHOR

WIZZUM engineering team

We design and commission wastewater and gas treatment installations for industry, from benchmarking and FEED engineering to start-up.

NEED HELP?

Do you want to reduce your plant's wastewater?

  • Comparative technical analyses
  • Design and delivery of turnkey installations
  • Environmental benchmarking and BAT analysis

Environmental engineering for industry.
Industrial wastewater, emissions and odors.

OFFICE

Avda. Cabrera, 36
08302 Mataró (Barcelona), Spain
info@wizzum.com

© 2026 Wizzum. All rights reserved.