Stricter regulations and sustainability goals are changing industrial wastewater treatment. Plants are going beyond the legal minimum and looking for installations that are efficient, robust and recover raw materials.
CONTENTS
IN SHORT
Industrial wastewater treatment is changing fast. Companies no longer see it only as a legal obligation and are investing in solutions that improve the efficiency and robustness of their installations and make it possible to get value out of wastewater. These are the eight trends we are seeing.
AOPs generate highly reactive hydroxyl radicals using ozone, hydrogen peroxide, UV radiation or catalysts. They break down complex pollutants: pharmaceuticals, dyes and industrial solvents.
They are mainly used as a polishing stage, when discharge limits are very strict or the water has to go back to the process. They combine well with membrane systems and with the solutions defined at the FEED engineering stage.
MBRs combine biological breakdown with membrane filtration and produce better effluent than classic activated sludge. They take up little space, ensure stable treated water quality and cope well with variable loads. They are also useful at plants aiming for ZLD.
These include microbial fuel cells (MFC) and microbial electrolysis cells (MEC). In them, electroactive bacteria break down pollutants and produce electricity or hydrogen along the way. The technology is still under development, but it could steer wastewater treatment toward energy recovery.
Prefabricated plug-and-play modules start up quickly and adapt to each site. They increase the plant’s resilience, reduce wastewater transport and make on-site water reuse easier. They work well at isolated plants and where the load varies a lot.
AI and IoT make it possible to measure pH, COD, turbidity and flow in real time and, with that data, adjust reagent dosing and energy use. Digital twins and cloud platforms make scenario simulation and predictive maintenance easier.
Water is becoming more expensive and in many regions abstraction is restricted. Plants are increasingly returning treated water to the process: as cooling water, process water or for cleaning. ZLD (zero liquid discharge) systems go the furthest. After reverse osmosis, evaporation and crystallization, no wastewater leaves the plant and the salts are removed in solid form. It is an expensive solution, so it is applied where discharge is particularly difficult or costly. We explain it in more detail in the article on crystallization of saline wastewater.
Resource recovery brings wastewater treatment into the circular economy. The main targets are phosphorus, nitrogen and scarce metals. The methods used are:
The recovered materials can go into fertilizers, serve as raw materials or go back into production. As regulations increasingly reward the circular model, resource recovery is becoming a competitive advantage.
AI-based predictive analytics uses current and historical data to anticipate deviations and trigger preventive measures. Machine learning can predict pollutant peaks, equipment wear and reagent overdosing.
The result is better discharge quality, lower costs and more accurate reporting. It adds the most value in high-risk sectors, because it helps avoid shutdowns, legal consequences and reputational damage. We explain the legal requirements behind these changes in the article on EU wastewater regulations.
These technologies offer more than regulatory compliance. The combination of biotechnology, modular installations, water recovery and AI-supported management points the way to durable and robust industrial water treatment systems.
An MBR combines biological treatment with membrane filtration, so it produces better effluent, takes up less space and copes better with variable loads.
To break down difficult pollutants, such as pharmaceuticals, dyes and solvents. They are usually used as a polishing stage when limits are very strict or before water is reused.
Mainly phosphorus, nitrogen and scarce metals, using methods such as struvite precipitation, selective ion exchange and biosorption.
AUTHOR
WIZZUM engineering teamWe design and commission wastewater and gas treatment installations for industry, from benchmarking and FEED engineering to start-up.
NEED HELP?
21/01/2025
Stricter discharge limits in the EU and how a plant can meet them.
Read the article →
05/12/2023
Water treatment as part of sustainable chemical production.
Read the article →
21/05/2024
Crystallization as a key stage in zero liquid discharge and salt recovery.
Read the article →
OFFICE
Avda. Cabrera, 36
08302 Mataró (Barcelona), Spain
info@wizzum.com
© 2026 Wizzum. All rights reserved.
