Home / Blog / Regulations and BAT

REGULATIONS AND BAT

EU wastewater regulations 2025: what an industrial plant needs to know

The 2025 EU wastewater regulations change the rules of the game for industrial plants across Europe. We explain what changes and how to prepare in good time.

W
WIZZUM engineering teamPublished on 21/01/2025 · Updated on 16/11/2026 · 6 min read

CONTENTS

IN SHORT

  • The new Wastewater Directive (EU) 2024/3019 has been in force since 1 January 2025, and Member States have to transpose it by 31 July 2027. Some obligations are phased in up to 2045.
  • The Directive tightens nitrogen and phosphorus requirements and introduces a fourth treatment stage for micropollutants and microplastics monitoring. At least 80% of the cost of removing micropollutants will be paid by manufacturers of medicines and cosmetics.
  • The Industrial Emissions Directive (IED) requires BAT to be applied, strict control of hazardous substances and real-time monitoring.
  • Modular installations, water recirculation at the plant and advanced treatment of emerging pollutants, among other things, help with compliance.

Why the rules are getting stricter

Industrial pollution damages Europe’s waters: biodiversity, drinking water safety and ecosystem stability. The Water Framework Directive sets quality standards to restore and protect aquatic ecosystems, and the 2025 regulations are aligned with the Paris Agreement and the UN Sustainable Development Goals.

  • The new Wastewater Directive covers more treatment plants, introduces new treatment stages and shifts part of the costs to manufacturers.
  • Society is demanding more transparency.
  • Non-compliance carries legal, financial and reputational risk.
  • The authorities are stepping up monitoring and inspections, so companies have to demonstrate compliance with reports, audits and traceability.

That is why it makes sense to see wastewater as a strategic flow of resources, not just something that has to be treated.

The most important changes

Urban Wastewater Treatment Directive

  • Directive (EU) 2024/3019 entered into force on 1 January 2025. Member States have to transpose it into national law by 31 July 2027.
  • By 2045, treatment plants serving 10,000 population equivalent or more will have to reach energy neutrality at national level.
  • Stricter nitrogen and phosphorus requirements. Large treatment plants will have a fourth treatment stage to remove micropollutants, such as residues of medicines and cosmetics.
  • Microplastics will be measured at the inlet and outlet of treatment plants, but the Directive does not set limits for them.
  • Industrial plants have to reduce COD, BOD and total suspended solids before discharging to the municipal sewer.
  • The “polluter pays” principle applies: at least 80% of the cost of the fourth treatment stage is paid by manufacturers of medicines for human use and of cosmetics, through extended producer responsibility.

Industrial Emissions Directive (IED)

  • It promotes the best available techniques (BAT), which reduce emissions.
  • It requires stricter control of hazardous substances and real-time monitoring.
  • It gives citizens more legal protection against pollution.
  • Plants have to keep close track of their pollutants, update their permits and document the results of applying BAT.

Circular Economy Action Plan

Part of the European Green Deal. It promotes water reuse, sludge reduction and resource recovery. It encourages water recycling and waste minimization, which supports ESG goals and economic resilience, especially in water-scarce regions.

Microplastics and emerging pollutants

The EU zero pollution action plan aims to cut the amount of microplastics released into the environment by 30% by 2030. However, the new Wastewater Directive does not set limits for microplastics in wastewater: it requires them to be measured at the inlet and outlet of treatment plants. Technologies used to remove microplastics and pharmaceutical residues include membrane bioreactors, advanced oxidation and electrochemical methods.

Restrictions on sludge

The Sewage Sludge Directive 86/278/EEC, from 1986, has not yet been amended. The European Commission evaluated it in 2023 and is considering a revision, but no new requirements have been decided so far. In any case, plants that work with toxic substances may need to reduce their sludge and incinerate it on site. Sludge logistics, waste management and material recovery also need to be planned.

How to prepare the plant: five recommendations

  • Invest in modular water treatment. It is scalable and flexible, and useful for companies with several plants or seasonal production.
  • Apply BAT. Less pollution means simpler compliance, but it requires regular assessments and continuous improvement.
  • Close the water cycle. Rainwater harvesting, graywater reuse, closed cooling water circuits.
  • Use advanced treatment. For microplastics, pharmaceuticals and other emerging pollutants.
  • Work with specialists. They will help you manage the technical complexity and build regulatory compliance into your sustainability strategy.

An overview of the technologies that help meet the new requirements is in the article on the 8 trends in industrial wastewater treatment.

Conclusion

The 2025 regulations require plants to show environmental responsibility and precise compliance. Companies that act early will reduce their legal and operational risks and create long-term value along the way.

Frequently asked questions

What does the new Urban Wastewater Treatment Directive change for industry?+

Plants have to reduce COD, BOD and total suspended solids before discharging to the municipal sewer. Nitrogen and phosphorus requirements are stricter, large treatment plants will have a fourth treatment stage for micropollutants and microplastics will be measured. Directive (EU) 2024/3019 has been in force since 1 January 2025, and Member States have to transpose it by 31 July 2027.

What does the Industrial Emissions Directive require?+

Applying the best available techniques (BAT), stricter control of hazardous substances, real-time monitoring, updating permits and documenting the results of BAT.

What is the EU target for microplastics?+

The EU zero pollution action plan aims to cut the amount of microplastics released into the environment by 30% by 2030. The Wastewater Directive does not set limits for microplastics, but requires them to be measured at the inlet and outlet of treatment plants.

W

AUTHOR

WIZZUM engineering team

We design and commission wastewater and gas treatment installations for industry, from benchmarking and FEED engineering to start-up.

NEED HELP?

Do you want to check whether your plant is ready for the new regulations?

  • Comparative technical analyses
  • Design and delivery of turnkey installations
  • Environmental benchmarking and BAT analysis

Environmental engineering for industry.
Industrial wastewater, emissions and odors.

OFFICE

Avda. Cabrera, 36
08302 Mataró (Barcelona), Spain
info@wizzum.com

© 2026 Wizzum. All rights reserved.